drop in expansion anchor

Short Description:


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Product Detail

    Product Tags

    Introduction: It is applied to non-cracking/cracking concrete and natural stone, and installation is very convenient.
    Material: Grade 5.8, 8.8 carbon steel and 304, 316 stainless steel
    Surface treatment: cold galvanized (zinc layer thickness ≥ 5um);

    hot galvanized (zinc layer thickness ≥ 45um);
    304,316 stainless steel does not require surface treatment.

    Technical parameters(mm):

    Product model

    Drilling diameter

    Standard drilling depth

    Effective depth

    Anchor length

    M6×25

    6

    28

    25

    25

    M8×30

    8

    33

    30

    30

    M10×40

    10

    43

    40

    40

    M12×25

    12

    53

    50

    50

    M16×65

    16

    68

    65

    65

    M20×80

    20

    83

    80

    80

    Operating:

    1. Use straight hole drills to drill holes of corresponding diameter and depth;
    2. Use the soot blower to sweep ash until the hole has no dust overflow;
    3. Put the anchor in the hole;
    4. Use a hammer to hit the inner core with a rod to expand the expansion sheet;
    5. Screw in the hex bolts to complete the anchoring.
    P.s. Electric hammer, drills, soot blowers, hammer and rod will be used during the operation. Jiraw is equipped with a mounting connector as standard. Others are purchased on demand


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • [Copy] [Copy] M24 High Strength Half Thread Bolt

      [Copy] [Copy] M24 High Strength Half Thread Bolt

      1.Commodity Name: DIN931/933 Grade 4.8/5.6/8.8/10.9/12.9 high tensile hex head bolt 2.Standard: DIN931, DIN933,DIN960, DIN961, DIN 609,ISO4014/4017/8676,Nonstandard bolt(according to your drawing),etc 3.Material: Carbon Steel,Alloy steel 4.Grade: 4.8 6.8.8.8 10.9 12.9etc 5.Surface Finish: Black,Zinc plated,Copper plating,Phosphating,Mechanical galvanized,hot dipped galvanized,daromet etc 6.Size: M3-M30;1/4″-4″ 7.Supply Ability: 50MT per month 8.Certificate: ISO900...

    • Expansion Bolts

      Expansion Bolts

      Product name Expansion bolt Size M6-M20 Grade Grade4.8 Material Steel, Stainless Steel Surface treatment Yellow zinc, white zinc

    • Expansion bolt with hole

      Expansion bolt with hole

      It can be used for the anchoring of concrete and external wall structural parts. Because the hole expansion is suitable before installation, the safety factor is the highest among all anchor bolts and is widely used. Material: Grade 5.8, 8.8 carbon steel and 304, 316 stainless steel Surface treatment: cold galvanized (zinc layer thickness ≥ 5um); hot galvanized (zinc layer thickness ≥ 45um); 304,316 stainless steel does not require surface treatment Operating: 1. Use straight hole drills to d...

    • High Strength Half Thread Bolt

      High Strength Half Thread Bolt

      1.Commodity Name: DIN931/933 Grade 4.8/5.6/8.8/10.9/12.9 high tensile hex head bolt 2.Standard: DIN931, DIN933,DIN960, DIN961, DIN 609,ISO4014/4017/8676,Nonstandard bolt(according to your drawing),etc 3.Material: Carbon Steel,Alloy steel 4.Grade: 4.8 6.8.8.8 10.9 12.9etc 5.Surface Finish: Black,Zinc plated,Copper plating,Phosphating,Mechanical galvanized,hot dipped galvanized,daromet etc 6.Size: M3-M30;1/4″-4″ 7.Supply Ability: 50MT per month 8.Certificate: ISO900...

    • hot-dip galvanized expansion bolt

      hot-dip galvanized expansion bolt

      4.8 / 5.6 / 5.8 / 8.8 / 10.9 / 12.9 grade Carbon steel hot dip galvanized / hdg / nickel / phosphated expansion anchor bolt Anchor bolt are available in a wide range of sizes – from M6-M24, with lengths up to 200mm. Concrete Fasteners carries anchors bolt in zinc plated carbon steel and stainless steel. Concrete anchors provide 360° of hole contact over large areas and greatly reduce concrete stress that can cause wear and tear over time. Available in four head styles – hex, flat, acorn...

    • [Copy] [Copy] M24 High Strength Half Thread Bolt

      [Copy] [Copy] M24 High Strength Half Thread Bolt

      1.Commodity Name: DIN931/933 Grade 4.8/5.6/8.8/10.9/12.9 high tensile hex head bolt 2.Standard: DIN931, DIN933,DIN960, DIN961, DIN 609,ISO4014/4017/8676,Nonstandard bolt(according to your drawing),etc 3.Material: Carbon Steel,Alloy steel 4.Grade: 4.8 6.8.8.8 10.9 12.9etc 5.Surface Finish: Black,Zinc plated,Copper plating,Phosphating,Mechanical galvanized,hot dipped galvanized,daromet etc 6.Size: M3-M30;1/4″-4″ 7.Supply Ability: 50MT per month 8.Certificate: ISO900...